Pro Tips for using synthetic urine bottles for drug testing

 

So I want to assure the folks who have apprehensions about carrying urine bottles or concerns about the synthetic urine itself .  Substitution is a much better option as it is nearly impossible to mess up if you follow these tips. 

 

 

The bottle should have a easy to read thermometer label  preferably with a 2 degree offset like the collection cups use for the most accurate temp.  

It is best to use a cap that  you can dispense without removing it which could result in you dropping it or leaving it behind  ( less things to mess with in such a situation ).

  
Warmers

Warmer should be the smallest hand warmer with longest activation time, not anything large that will result in excess tempt issues .
An adhesive tab or rubber band to secure warmer to bottle 
 
Powdered Synthetic Urine  
All Liquid Urine contains Biocides and or peroxides  which can pop a validation screen and leave sample flat and odorless .   
Powdered Synthetic    does not need to use biocides ,

CARRY TIPS

To ensure accuracy, it is advisable to practice beforehand in order to determine the temperature after carrying the item for an hour and to confirm that it is securely positioned.
For a warm water-filled bottle, aim for a temperature range of 100 degrees Fahrenheit. To achieve this, you can briefly microwave the bottle few seconds, shake it, and then check the temperature. It is not advisable to use a warmer to heat the sample, as it would take a considerable amount of time. 

The warmer is a insulating heat and body flesh regulates the temp pulling excess heat away from bottle .

 It is important to note that if the temperature exceeds the range of the thermometer, it will not be displayed. If bottle feels warms to hand its probably too warm as you can't really feel body temp unless hands are cold.

The sample should be added only when you are ready to conduct the test.

Pick up  extra hand warmers at walmart ( usually have 2 packs in check outs )  carry with water for an hour  and walk around to see how temp holds.  Carry both ways with and without  to observe if temp is issue . May not need them in summer however labs keep waiting groom cold as ice for this reason .
With a dry run you will have confidence and overcome any nervous issues.


For random testing scenarios,Carry the warm water and the vial separately.

Just remove cap from vial (put cap in pocket) then insert the vial into  bottle and secure cap  and shake.  

 

Description   

Using Synthetic or Fake Urine is not recommended unless it is powdered. Liquid urine are all basically the same and contain biocides of one type or another to keep it shelf stable.  Fake it powdered Synthetic urine is the best option if you need a solution that closely resembles urine. It includes all the necessary properties including uric acid, urea, color odor, creatinine levels, ph  and specific gravity that match healthy human levels. 
 
 

• About an hour before your drop prepare for your urine, mix the powdered urine with bottled water at home at temp of 100f . Open warmer and apply as directed to bottle opposite the temp meter. This will stay at body temp all day.  The desired temperature will take approximately 15 minutes to regulate, can drop sample once it indicates the correct temperature (90-100F/32-37C).  

• The Fake It powder is specifically designed to resemble drug-free human urine the same as human urine in appearance, scent, or chemical properties. Our powdered urine is free of toxins and is undetectable and is the most dependable product made. 
   

• The kit One shot includes a 60-ml soft plastic HDPE bottle and the Urine trouble bladder will hold 180ml . , an air-activated heater that lasts up to 8 hours, a temperature strip use don lab collection cups and an instruction sheet with helpful hints and tips.  

• Extra heaters hot hands can be obtained at walmart . 

 

Product Details 

What comes in the ONE-SHOT Powdered Urine Kit? 

• One vial containing FAKE IT powdered urine 

• One 60 ml HDPE bottle with twist top spout  

• One temperature strip 

• Air-activated heaters 

  

Instructions 
 

1. Just remove cap from vile of powdered urine and insert the whole vile into bottle of 100f bottled water when ready to test. 

2. Open the heater package, peel the paper off of one heater, and stick it to the backside of the bottle, directly opposite the temperature strip. 

3. Before conducting your experiment, verify the temperature is within the correct range (90-100F/32-37C). 

 

Tips and Tricks To Pass the Urine Drug Test with Not Synthetic Urine or Fake Urine. 

• Mixing urine into 100f water means it will adjust to body tempo fast, you do not use warmer pad to heat urine this would take a long time. Your body contact to bottle regulates and pulls any extra heat away. verify that the urine temperature is between 90F and 100F/32C and 37C. Any sample outside that temperature could cause an invalid experiment, unintended laboratory test results, or anomalies. So practice with just the water carry to observe temp.  

• if you do not see a reading on the temperature strip. The urine is either too cold or too hot. The temperature strip is highly accurate, reusable, and the highest-quality component in the kit. 

• Do not remove the heater from the bottle unless the urine is too hot; otherwise, the temperature will eventually fall out of the required range of 90 to 99 degrees. This is why you practice with water. 

 

 

   FAKE IT a custom powdered synthetic urine  that contains nothing not found in human urine that may be indicated in the pre test Validation screen.