What are the risk with "Dilution" for Passing Urine Drug Test

What is a Dilution  method for urine drug test?

A urine drug test is a common way for employees, healthcare providers, and law enforcement agencies to detect the presence of drugs in an individuals system. One method used to try and pass a urine drug test is through dilution.  In regards to drug test, " Dilution " means  - the method to pass a urine drug screen by ingesting  large amounts of liquids to Dilute your bladder and thus dilute your metabolite levels below the cut off point. 

 

How Dilution methods work  

  The liquid need only be water but best if it is also a diuretic. Diuretics help the body get rid of excess fluid, mainly water and sodium.When diuretics stimulate kidneys to flush away sodium the body also flushes away water. This can be done by using herbal items such as dandelion root, horsetail, celery seed, green or black teas or coffee.

 By drinking large amounts of fluids, individuals aim to lower the concentration of drug metabolites in their urine sample, making it more difficult to detect. 

 What makes Dilution Risky ? 

The truth about dilution for drug testing is that it does not detoxify the body but only dilutes the urine with water. Substances like certo,  ( which require large amounts of  WATER)  and expensive detox drinks do not "detoxify" the body either are they diuretics. After consuming these the body's urine is diluted with water for a relatively short window. This creates a clear urine sample which is actually not unnatural as most drink extra prior to test but  promoters of the dilution method will say to just take B vitamins for color and creatine supplements.  However your still diluting it and if does add any color it will be a suspicious fake neon yellow.  Also Color is not a qualifying parameter so why mess with it ?  As for creatine supplements - this is another sweet spot factor in timing of consumption to get it the creatine to convert to creatinine as shown in study  "  The effects of creatine ingestion on urinary creatine concentration: Does supplementation mask heavy dilution? ". Proper use of creatine for the  purpose of suplementing during dilution requires 20 grams to be hydrated in acid or orange juice for 3 days then consumed prior to testing  so that all the cratine is converted to creatinine . " Detox" rinks like q carbo are mostly herbal tea and contain VERY little insignificant amount of creatine considering your still DILUTING IT. 

 

The Trick is that you have to ingest enough fluids to dilute your urine and metabolite levels to below threshold but NOT to point that your creatinine and Specific gravity (urine density), which is what results in a DILUTED result. Dilution results are also effected by sex and weight as seen in this study "Creatinine excretion in consecutive urine samples after controlled ingestion of water" .  Dilution is not permanent, as you urinate you remove water and body returns to previous levels. You have to hit the sweet spot during a short window, without coming up diluted.  

Urine drug screens are performed by measuring amounts of drug metabolites and if they fall over a threshold your deemed POSITIVE and if under your negative.  However Lab drug tests have two parts, including the Specimen validity testing (SVT). SVT is done to check for substitution or a sample that is not characteristic of human urine.

 The Validation screen which is performed prior to or simultaneously with drug screen. Specimen validity testing (SVT) is performed on a urine drug screen specimen to detect substances, adulteration, or dilution ( result from creatinine and specific gravity levels being crashed or under limits).

  The validation screen will also look at non human items such as sanitizing agents used in liquid urine or masking agents (adulteration). Adulteration involves adding chemicals to destroy the drug metabolite. 

 WHEN SELF TESTING  THEY DO NOT LOOK AT SPECIFIC GRAVITY AND COULD GIVE A FALSE NEGATIVE   YOU WANT TO TEST SG TO VERIFY IF OUR TOO DILUTED SO YOU KNOW YOUR WINDOW BASED ON FLUID INTAKE OVER TIME

 Alternatives to Dilution methods.

 Detoxing 

 

All drugs will be gone from urine in 3-5 days except repeated use of THC as it builds up and stores in body fat and liver.  However if you are a repeat user of THC and if your non active heavy body mass person you may not have the 1-2 month needed.

 

Adulteration 

Not even going to bother as this is a major part of the SVT 

 

 

Synthetic Urine Substitution  

This is the most effective method for passing a urine drug test every single time providing your not on observed probation  or (depending on the labs validation screen parameters ) a liquid urine as they all contain a sanitizing agent to keep them shelf stable.  Powdered synthetic urine avoid this risk but requires pre mixing which is not a major issue. I have personally done 2 pre employment and 5 randoms using synthetic and i can say once you do it and get over the jitters you feel bullet proof from then on.

 

 

"But im too scared ill get caught " 

 

 The only concern with synthetic is getting the urine in the cup at temperature.  

Simply practice carrying with water and warming pads to get rid of being nervous.

To conclude

  basically dilution is a 50 50 crap shoot with success based on your use level, amount of liquid consumed and timing it before level return to measurable levels so as to not OVER DILUTE. IF your going to attempt it I suggest you practice by doing said method and  using  a self pre test with some cheap test sticks.   

 Pro Tips for using synthetic urine bottles for drug testing

 

So I want to assure the folks who have apprehensions about carrying urine bottles or concerns about the synthetic urine itself .  Substitution is a much better option as it is nearly impossible to mess up if you follow these tips. 

 

 

The bottle should have a easy to read thermometer label  preferably with a 2 degree offset like the collection cups use for the most accurate temp.  

It is best to use a cap that  you can dispense without removing it which could result in you dropping it or leaving it behind  ( less things to mess with in such a situation ).

  
Warmers

Warmer should be the smallest hand warmer with longest activation time, not anything large that will result in excess tempt issues .
An adhesive tab or rubber band to secure warmer to bottle 
 
Powdered Synthetic Urine  
All Liquid Urine contains Biocides and or peroxides  which can pop a validation screen and leave sample flat and odorless .   
Powdered Synthetic    does not need to use biocides ,

CARRY TIPS

To ensure accuracy, it is advisable to practice beforehand in order to determine the temperature after carrying the item for an hour and to confirm that it is securely positioned.
For a warm water-filled bottle, aim for a temperature range of 100 degrees Fahrenheit. To achieve this, you can briefly microwave the bottle few seconds, shake it, and then check the temperature. It is not advisable to use a warmer to heat the sample, as it would take a considerable amount of time. 

The warmer is a insulating heat and body flesh regulates the temp pulling excess heat away from bottle .

 It is important to note that if the temperature exceeds the range of the thermometer, it will not be displayed. If bottle feels warms to hand its probably too warm as you can't really feel body temp unless hands are cold.

The sample should be added only when you are ready to conduct the test.

Pick up  extra hand warmers at walmart ( usually have 2 packs in check outs )  carry with water for an hour  and walk around to see how temp holds.  Carry both ways with and without  to observe if temp is issue . May not need them in summer however labs keep waiting groom cold as ice for this reason .
With a dry run you will have confidence and overcome any nervous issues.


For random testing scenarios,Carry the warm water and the vial separately.

Just remove cap from vial (put cap in pocket) then insert the vial into  bottle and secure cap  and shake.  

 

Description   

Using Synthetic or Fake Urine is not recommended unless it is powdered. Liquid urine are all basically the same and contain biocides of one type or another to keep it shelf stable.  Fake it powdered Synthetic urine is the best option if you need a solution that closely resembles urine. It includes all the necessary properties including uric acid, urea, color odor, creatinine levels, ph  and specific gravity that match healthy human levels. 
 
 

• About an hour before your drop prepare for your urine, mix the powdered urine with bottled water at home at temp of 100f . Open warmer and apply as directed to bottle opposite the temp meter. This will stay at body temp all day.  The desired temperature will take approximately 15 minutes to regulate, can drop sample once it indicates the correct temperature (90-100F/32-37C).  

• The Fake It powder is specifically designed to resemble drug-free human urine the same as human urine in appearance, scent, or chemical properties. Our powdered urine is free of toxins and is undetectable and is the most dependable product made. 
   

• The kit One shot includes a 60-ml soft plastic HDPE bottle and the Urine trouble bladder will hold 180ml . , an air-activated heater that lasts up to 8 hours, a temperature strip use don lab collection cups and an instruction sheet with helpful hints and tips.  

• Extra heaters hot hands can be obtained at walmart . 

 

Product Details 

What comes in the ONE-SHOT Powdered Urine Kit? 

• One vial containing FAKE IT powdered urine 

• One 60 ml HDPE bottle with twist top spout  

• One temperature strip 

• Air-activated heaters 

  

Instructions 
 

1. Just remove cap from vile of powdered urine and insert the whole vile into bottle of 100f bottled water when ready to test. 

2. Open the heater package, peel the paper off of one heater, and stick it to the backside of the bottle, directly opposite the temperature strip. 

3. Before conducting your experiment, verify the temperature is within the correct range (90-100F/32-37C). 

 

Tips and Tricks To Pass the Urine Drug Test with Not Synthetic Urine or Fake Urine. 

• Mixing urine into 100f water means it will adjust to body tempo fast, you do not use warmer pad to heat urine this would take a long time. Your body contact to bottle regulates and pulls any extra heat away. verify that the urine temperature is between 90F and 100F/32C and 37C. Any sample outside that temperature could cause an invalid experiment, unintended laboratory test results, or anomalies. So practice with just the water carry to observe temp.  

• if you do not see a reading on the temperature strip. The urine is either too cold or too hot. The temperature strip is highly accurate, reusable, and the highest-quality component in the kit. 

• Do not remove the heater from the bottle unless the urine is too hot; otherwise, the temperature will eventually fall out of the required range of 90 to 99 degrees. This is why you practice with water. 

 

 

   FAKE IT a custom powdered synthetic urine  that contains nothing not found in human urine that may be indicated in the pre test Validation screen.

 

 

Truth about dilution for urine test- ( certo , niacin , detox drinks )

 Whats the truth about Dilution for drug test ?

Do things like certo , Niacin or expensive "Detox Drinks" actually "Detox " you ? 

Methods using products like Certo, or detox drinks are essentially just adding them to a standard dilution agent like water. In the past, before synthetic urine and the internet, people used to rely on goldenseal tea for flushing. Therefore, there is no need to rely on gimmicky drinks that cost $40 and tell you to drink a gallon of water. It's important to recognize that it's the water that is diluting your urine after consuming pectin Certo, niacin, or detox drinks. Similarly, detox drinks instruct you to drink them along with multiple bottles of water, urinate a few times while continuing to drink more water before the test.

Some might wonder about the color of the urine, but in a urine test, the color is not a significant factor, and most people tend to hydrate prior to the test so they can produce urine and leave quickly. Concerning the possibility of over-hydrating and receiving a negative result due to low levels of creatinine and specific gravity (urine density), the drink itself doesn't add anything to counteract that. If you're diluting your urine by hydrating excessively, everything, including drug metabolites, color and creatinine will be diluted.

What actually happens is that you dilute your urine with water, and approximately an hour after you stop drinking excessive amounts of water, your body regulates itself and expels the excess water through urine, returning your levels to their true concentrations. This process doesn't "detox" your body as commonly claimed by those selling drinks or promoting online methods. In simple terms, the reason some people pass a urine test using these drinks and methods is often due to luck.

Alternatively, they might not have had drugs in their system to begin with, which is common for one-time users or occasional THC users who become paranoid and believe the drug will stay in their system indefinitely. However, a single use of THC typically clears from the body within three days, just like most other drugs. Many people who claim to have "passed" using these products are often one-time THC users who panicked without knowing the drug's elimination time frame. It's advisable to use a simple, inexpensive self-test urine stick before resorting to panic buying these drinks.

A laboratory drug test consists of two parts. The first part is the Validity Screen, which checks for levels of creatinine (not creatine) and specific gravity, among other factors that indicate potential sample masking or tampering. If you flush and dilute your urine but the creatinine and specific gravity levels are not significantly altered, then the urine is not considered diluted. Furthermore, if your metabolite levels are below the testing threshold, you will receive a negative result and pass the test.

However, if the specific gravity (urine density) and creatinine levels are too low, it indicates that you have consumed substances to alter your urine, which raises suspicion. Fortunately, they won't fail you outright, and you will have the opportunity to try the test again, although it may appear suspicious.

To summarize, if dilution is your only option, all you need is a $5.00 box of detox tea from any store and some inexpensive self-test sticks. Avoid self-testing when you are excessively hydrated as it may produce false negative results, as urine density validation is not performed. Remember, even a faint line on the test is considered negative for THC.

What works every single time is substituting your urine with synthetic urine. The only concern is ensuring that the synthetic urine is at the correct temperature when you submit it, but this can be easily managed with a proper container. Synthetic urine has been available for a long time, and it is a reliable method. Some may perceive it as riskier, but that is not accurate. Just practice carrying it to ensure you

What does work every single time is Synthetic urine substitution .  Your only concern is getting it in the cup at temp which is easy peezy with a proper container. Synthetic urine has been around a long time and its easy to beat. Most think it riskier but that is false.  Just practice carrying it so you know how to keep it at temp and your golden . 

One Shot Synthetic Urine Kit

Specimen validity testing the test before the (drug) test

Specimen validity testing the test before the (drug) test

Specimen validity testing (SVT) is performed on a urine drug screen specimen to detect substitution, adulteration, or dilution.

Specimen validity testing (SVT) is a critical component of urine drug screening programs. The process of collecting and testing urine samples for drugs of abuse can be susceptible to adulteration or substitution, making it challenging to ensure accurate test results. 

Specimen validity testing (SVT) is using substitution techniques,diluting urine, or adding a substance to a sample.

Characteristics	Normal Range
Creatinine, mg/dL	20–400
Specific gravity	1.002–1.030
pH	4.5–8.0
Temperature, within 4 minutes of voiding, °F	90–100

 SVT is a multifaceted process that includes various methods and techniques.

 Dilution —When someone drinks a significant amount of water shortly before providing a urine sample for donation or due to certain physiological conditions, it can lead to diluted urine. This dilution can cause drug or metabolite concentrations to fall below the initial test cutoff, potentially resulting in a false negative outcome. Dilution will mainly effect creatinine and specific gravity. 

 

Creatinine: Creatinine is a natural substance found in urine. It is created when muscle tissue breaks down and is eliminated from the body through the kidneys. Typically, the concentration of creatinine in urine falls within the range of 20 to 400 mg/dL. However, levels outside of this range can indicate factors such as excessive fluid intake, renal failure, diet, or various other medical conditions.

Specific Gravity: Specific gravity (SG) is a measure of the density of a liquid compared to the density of water. It helps determine the concentration of dissolved particles in a urine sample. A decrease in SG values may be attributed to factors like excessive fluid intake,

 

 

 Adulteration —Adding a substance to a specimen after it has been collected. The product added is designed to mask the presence of, or chemically destroy, the drug or drug metabolite that the specimen may contain. An adulterant product may be added with the intention of adversely affecting the testing reagents.

Adulterated Specimen

Urine samples with a pH level below 4.0 or above 9.0 are considered adulterated. An adulterated specimen refers to a urine sample that contains a substance not typically found in urine or an endogenous substance present at an abnormal concentration compared to normal physiological levels. 

Adulterants are products added to the urine with the purpose of masking or chemically destroying the presence of drugs or drug metabolites that the specimen may contain. Adulterant products can also be added to interfere with the testing reagents, or in the case of liquid synthetic urine, act as a preservative to maintain its stability over time.

  Some common oxidants used to attempt to alter urine drug test results are bleach, biocides, nitrate, chromate, iodate, and peroxidase. A positive result for oxidant activity should be considered when interpreting drug results.

 The most popular liquid urine product contains biocides and peroxides and if use din a reputable lab will result in “not consistent with human urine”

pH

The pH level of a urine sample indicates its acidity or alkalinity. Typically, urine pH values range from 4.5 to 9.0. However, if urine specimens are stored under unfavorable conditions such as high temperatures, the pH may rise as high as 9.5. Abnormally high or low pH levels can suggest tampering or adulteration of the sample.

When assessing urine samples, creatinine, specific gravity (SG), and pH are taken into account to determine their validity. All three criteria must fall within the range of normal human urine for a sample to be considered valid. 

 

 These tests are used to assess the validity of the urine specimen by determining its composition and consistency. A urine sample that falls outside the expected ranges for any of these parameters may be indicative of tampering or adulteration.

Urine States	Description
Diluted	Urine creatinine ≥ 2 mg/dL but < 20 mg/dL
	Specific gravity > 1.001 but < 1.030
Substituted	Urine creatinine < 2 mg/dL
	Specific gravity < 1.001 or > 1.020
Adulterated	pH < 3 or > 11
	Nitrite concentration > 500 mcg/mL
	Chromium concentration > 50 mcg/mL
	Presence of: Halogen (bleach, iodine, fluoride), glutaraldehyde, pyridine, surfactant

In addition to these methods, SVT also involves chain of custody procedures, including documentation and tracking of the sample from collection to testing. This ensures that the sample has not been tampered with or substituted during the collection process.

The use of SVT is essential for maintaining the integrity of urine drug screening programs. It provides a reliable mechanism for detecting attempts to alter or adulterate urine specimens and ensures accurate test results. SVT can help prevent false negatives or false positives, which can have significant consequences for individuals undergoing drug testing.

It is important to note that SVT is not foolproof and can be susceptible to manipulation by individuals attempting to cheat the system. However, the use of multiple SVT methods and stringent chain of custody procedures can help minimize the risk of tampering or substitution.

In conclusion, SVT is a critical component of urine drug screening programs. It involves various methods and techniques to assess the validity of urine specimens and detect attempts to tamper with or adulterate them. The use of SVT helps maintain the integrity of drug testing programs and ensures accurate test results.

 Watch a Sample Validly Test  on  Synthetic urine  

 showing proper validity levels of the FAKE IT synthetic urine