Pro Tips for using synthetic urine bottles for drug testing

 

So I want to assure the folks who have apprehensions about carrying urine bottles or concerns about the synthetic urine itself .  Substitution is a much better option as it is nearly impossible to mess up if you follow these tips. 

 

 

The bottle should have a easy to read thermometer label  preferably with a 2 degree offset like the collection cups use for the most accurate temp.  

It is best to use a cap that  you can dispense without removing it which could result in you dropping it or leaving it behind  ( less things to mess with in such a situation ).

  
Warmers

Warmer should be the smallest hand warmer with longest activation time, not anything large that will result in excess tempt issues .
An adhesive tab or rubber band to secure warmer to bottle 
 
Powdered Synthetic Urine  
All Liquid Urine contains Biocides and or peroxides  which can pop a validation screen and leave sample flat and odorless .   
Powdered Synthetic    does not need to use biocides ,

CARRY TIPS

To ensure accuracy, it is advisable to practice beforehand in order to determine the temperature after carrying the item for an hour and to confirm that it is securely positioned.
For a warm water-filled bottle, aim for a temperature range of 100 degrees Fahrenheit. To achieve this, you can briefly microwave the bottle few seconds, shake it, and then check the temperature. It is not advisable to use a warmer to heat the sample, as it would take a considerable amount of time.
The warmer is a insulating heat and body flesh regulates the temp pulling excess heat away from bottle .

 It is important to note that if the temperature exceeds the range of the thermometer, it will not be displayed. If bottle feels warms to hand its probably too warm as you can't really feel body temp unless hands are cold.

The sample should be added only when you are ready to conduct the test.

Pick up  extra hand warmers at walmart ( usually have 2 packs in check outs )  carry with water for an hour  and walk around to see how temp holds.  Carry both ways with and without  to observe if temp is issue . May not need them in summer however labs keep waiting groom cold as ice for this reason .
With a dry run you will have confidence and overcome any nervous issues.


For random testing scenarios,Carry the warm water and the vial separately.

Just remove cap from vial (put cap in pocket) then insert the vial into  bottle and secure cap  and shake.  

 

   FAKE IT a custom powdered synthetic urine  that contains nothing not found in human urine that may be indicated in the pre test Validation screen.

 

 

DELTA 8 will show on drug test and it take longer to detox

 This is a typical post from Delta 8 users 

smoked Delta 8 heavily for one week. 7 days away from 2 months since. this stuff stays with you for a long time

SO the thing is we believe these reagent dip stick and CUP  test do NOT differentiate from delta 8 and real THC. So they are unreliable in that a LAB may not see it at all . BUT if it is seeing it then it at least shows it stays around in system longer than real THC use.

 

 

Delta-8-THC is structurally very similar to delta-9-THC but is known to have weaker attraction to the cannabinoid receptor type 1 (CB1). This leads to delta-8 having fewer psychotropic effects and fewer adverse effects than delta-9-THC. However, despite delta-8’s fewer effects, it is still metabolized to a similar chemical compound to delta-9-THC, which frequently leads to a positive UDS for marijuana metabolites and could potentially lead to a positive confirmatory test, too.

 

-  . Kruger JS, Kruger DJ. Delta-8-THC: Delta-9-THC’s nicer younger sibling? Journal of Cannabis Research. 2022;4(1):4. doi:10.1186/s42238-021-00115-8

 

 

delta-8-tetrahydrocannabinol is a compound that exists in cannabis. It’s just one of many cannabinoids that include; CBD, CBG, and of course, THC.Extracting delta-8 from raw hemp material is costly and time-consuming. Fortunately, manufacturers have found an alternative way to produce the compound; cannabinoid conversion.

Create a CBD isolate: Before the conversion can begin, the hemp extract needs to be purified into 98% CBD. The extract undergoes an extensive filtration process, which removes all other cannabinoids and terpenes. Combine with a solvent and acid: Manufacturers add a non-polar solvent, such as heptane, to the mixture. Once fully dissolved, they add an acid reagent in order to produce the chemical reaction and cannabinoid conversion. The solution is then continually stirred for at least 3 hours; a stirring plate is often used. Depending on the formula, the solution is either kept at room temperature or heated. Neutralize and clean the solution: Producing delta-8 can create several unwanted byproducts, such as solvent and acid residue. So cleaning and filtering the solution is essential. It’s common to use a distilled water and sodium bicarbonate wash and sometimes a rotary evaporator.   The Problem With Converting CBD Into Delta-8 While creating lab-produced delta-8 is relatively simple, it involves combining lots of potentially dangerous chemicals. Because of this, only licensed chemists and experienced manufacturers should manipulate CBD into delta-8. Unfortunately, many low-quality “at-home” kits and formulas are on the market. By using them, consumers run the risk of handling and ingesting harmful acid and solvent residue. For those interested in trying delta-8, buying from reputable and high-quality brands is an important decision. It’s rare to find naturally-derived delta-8 products. While the cannabinoid does exist in cannabis, its limited concentration makes it an unpopular method of extraction. Instead, most companies make delta-8 products with hemp-derived cannabinoids, like CBD, and convert them into the compound. Using a simple lab process like cannabinoid conversion has made delta-8 products affordable for many consumers. It’s worth remembering that delta-8 products are still new to the cannabis market. Extraction, conversion, and testing techniques are constantly developing and improving. And, much like the cannabis industry as a whole, the lack of regulation means that poorly-made products do exist. Consumers should be extra vigilant about quality when buying delta-8 products.

 People think that delta 8 is legal and its not same as weed .  WRONG sort of  all delta products show up as THC and im guessing due to processing of making it which is not a natural product in a herbal form it is just hemp SPRAYED with a ? compound ,  it sticks around much longer. Best to stay the hell away from it.  Only lots of cardio and detox tea will flush it out any cannabinoid.  If you are testing dirty and have a test best thing to do is keep a ONE SHOT synthetic urine bottle on hand  

Truth about dilution for urine test- ( certo , niacin , detox drinks )

 Whats the truth about Dilution for drug test ?

Do things like certo , Niacin or expensive "Detox Drinks" actually "Detox " you ? 

Methods using products like Certo, or detox drinks are essentially just adding them to a standard dilution agent like water. In the past, before synthetic urine and the internet, people used to rely on goldenseal tea for flushing. Therefore, there is no need to rely on gimmicky drinks that cost $40 and tell you to drink a gallon of water. It's important to recognize that it's the water that is diluting your urine after consuming pectin Certo, niacin, or detox drinks. Similarly, detox drinks instruct you to drink them along with multiple bottles of water, urinate a few times while continuing to drink more water before the test.

Some might wonder about the color of the urine, but in a urine test, the color is not a significant factor, and most people tend to hydrate prior to the test so they can produce urine and leave quickly. Concerning the possibility of over-hydrating and receiving a negative result due to low levels of creatinine and specific gravity (urine density), the drink itself doesn't add anything to counteract that. If you're diluting your urine by hydrating excessively, everything, including drug metabolites, color and creatinine will be diluted.

What actually happens is that you dilute your urine with water, and approximately an hour after you stop drinking excessive amounts of water, your body regulates itself and expels the excess water through urine, returning your levels to their true concentrations. This process doesn't "detox" your body as commonly claimed by those selling drinks or promoting online methods. In simple terms, the reason some people pass a urine test using these drinks and methods is often due to luck.

Alternatively, they might not have had drugs in their system to begin with, which is common for one-time users or occasional THC users who become paranoid and believe the drug will stay in their system indefinitely. However, a single use of THC typically clears from the body within three days, just like most other drugs. Many people who claim to have "passed" using these products are often one-time THC users who panicked without knowing the drug's elimination time frame. It's advisable to use a simple, inexpensive self-test urine stick before resorting to panic buying these drinks.

A laboratory drug test consists of two parts. The first part is the Validity Screen, which checks for levels of creatinine (not creatine) and specific gravity, among other factors that indicate potential sample masking or tampering. If you flush and dilute your urine but the creatinine and specific gravity levels are not significantly altered, then the urine is not considered diluted. Furthermore, if your metabolite levels are below the testing threshold, you will receive a negative result and pass the test.

However, if the specific gravity (urine density) and creatinine levels are too low, it indicates that you have consumed substances to alter your urine, which raises suspicion. Fortunately, they won't fail you outright, and you will have the opportunity to try the test again, although it may appear suspicious.

To summarize, if dilution is your only option, all you need is a $5.00 box of detox tea from any store and some inexpensive self-test sticks. Avoid self-testing when you are excessively hydrated as it may produce false negative results, as urine density validation is not performed. Remember, even a faint line on the test is considered negative for THC.

What works every single time is substituting your urine with synthetic urine. The only concern is ensuring that the synthetic urine is at the correct temperature when you submit it, but this can be easily managed with a proper container. Synthetic urine has been available for a long time, and it is a reliable method. Some may perceive it as riskier, but that is not accurate. Just practice carrying it to ensure you

What does work every single time is Synthetic urine substitution .  Your only concern is getting it in the cup at temp which is easy peezy with a proper container. Synthetic urine has been around a long time and its easy to beat. Most think it riskier but that is false.  Just practice carrying it so you know how to keep it at temp and your golden . 

One Shot Synthetic Urine Kit

Specimen validity testing the test before the (drug) test

Specimen validity testing the test before the (drug) test

Specimen validity testing (SVT) is performed on a urine drug screen specimen to detect substitution, adulteration, or dilution.

Specimen validity testing (SVT) is a critical component of urine drug screening programs. The process of collecting and testing urine samples for drugs of abuse can be susceptible to adulteration or substitution, making it challenging to ensure accurate test results. 

Specimen validity testing (SVT) is using substitution techniques,diluting urine, or adding a substance to a sample.

Characteristics	Normal Range
Creatinine, mg/dL	20–400
Specific gravity	1.002–1.030
pH	4.5–8.0
Temperature, within 4 minutes of voiding, °F	90–100

 SVT is a multifaceted process that includes various methods and techniques.

 Dilution —When someone drinks a significant amount of water shortly before providing a urine sample for donation or due to certain physiological conditions, it can lead to diluted urine. This dilution can cause drug or metabolite concentrations to fall below the initial test cutoff, potentially resulting in a false negative outcome. Dilution will mainly effect creatinine and specific gravity. 

 

Creatinine: Creatinine is a natural substance found in urine. It is created when muscle tissue breaks down and is eliminated from the body through the kidneys. Typically, the concentration of creatinine in urine falls within the range of 20 to 400 mg/dL. However, levels outside of this range can indicate factors such as excessive fluid intake, renal failure, diet, or various other medical conditions.

Specific Gravity: Specific gravity (SG) is a measure of the density of a liquid compared to the density of water. It helps determine the concentration of dissolved particles in a urine sample. A decrease in SG values may be attributed to factors like excessive fluid intake,

 

 

 Adulteration —Adding a substance to a specimen after it has been collected. The product added is designed to mask the presence of, or chemically destroy, the drug or drug metabolite that the specimen may contain. An adulterant product may be added with the intention of adversely affecting the testing reagents.

Adulterated Specimen

Urine samples with a pH level below 4.0 or above 9.0 are considered adulterated. An adulterated specimen refers to a urine sample that contains a substance not typically found in urine or an endogenous substance present at an abnormal concentration compared to normal physiological levels. 

Adulterants are products added to the urine with the purpose of masking or chemically destroying the presence of drugs or drug metabolites that the specimen may contain. Adulterant products can also be added to interfere with the testing reagents, or in the case of liquid synthetic urine, act as a preservative to maintain its stability over time.

  Some common oxidants used to attempt to alter urine drug test results are bleach, biocides, nitrate, chromate, iodate, and peroxidase. A positive result for oxidant activity should be considered when interpreting drug results.

 The most popular liquid urine product contains biocides and peroxides and if use din a reputable lab will result in “not consistent with human urine”

pH

The pH level of a urine sample indicates its acidity or alkalinity. Typically, urine pH values range from 4.5 to 9.0. However, if urine specimens are stored under unfavorable conditions such as high temperatures, the pH may rise as high as 9.5. Abnormally high or low pH levels can suggest tampering or adulteration of the sample.

When assessing urine samples, creatinine, specific gravity (SG), and pH are taken into account to determine their validity. All three criteria must fall within the range of normal human urine for a sample to be considered valid. 

 

 These tests are used to assess the validity of the urine specimen by determining its composition and consistency. A urine sample that falls outside the expected ranges for any of these parameters may be indicative of tampering or adulteration.

Urine States	Description
Diluted	Urine creatinine ≥ 2 mg/dL but < 20 mg/dL
	Specific gravity > 1.001 but < 1.030
Substituted	Urine creatinine < 2 mg/dL
	Specific gravity < 1.001 or > 1.020
Adulterated	pH < 3 or > 11
	Nitrite concentration > 500 mcg/mL
	Chromium concentration > 50 mcg/mL
	Presence of: Halogen (bleach, iodine, fluoride), glutaraldehyde, pyridine, surfactant

In addition to these methods, SVT also involves chain of custody procedures, including documentation and tracking of the sample from collection to testing. This ensures that the sample has not been tampered with or substituted during the collection process.

The use of SVT is essential for maintaining the integrity of urine drug screening programs. It provides a reliable mechanism for detecting attempts to alter or adulterate urine specimens and ensures accurate test results. SVT can help prevent false negatives or false positives, which can have significant consequences for individuals undergoing drug testing.

It is important to note that SVT is not foolproof and can be susceptible to manipulation by individuals attempting to cheat the system. However, the use of multiple SVT methods and stringent chain of custody procedures can help minimize the risk of tampering or substitution.

In conclusion, SVT is a critical component of urine drug screening programs. It involves various methods and techniques to assess the validity of urine specimens and detect attempts to tamper with or adulterate them. The use of SVT helps maintain the integrity of drug testing programs and ensures accurate test results.

 Watch a Sample Validly Test  on  Synthetic urine  

 showing proper validity levels of the FAKE IT synthetic urine 

Risk associated with Flushing to pass Urine test

Are their risk to flushing to beat a urine drug test?

To be clear flushing is not proper detoxing so when a detox drink is called detox thats not whats really going on .

The flushing strategy involves putting large quantities of liquids into your body so that the  metabolites will be washed out as fast as possible. It is unlikely that you will remove 100% of drug metabolites using this method, but it can be effective in reducing the concentration of drug traces in your sample to below the threshold .

The Office of Drug Enforcement at the Department of Transportation (DOT) asked Dr Edward Cone from the Addiction Research Center (ARC) to investigate how effective the flushing method was. He demonstrated that drinking 1 gallon of water made the gravity of marijuana in the system drop to extremely low level and also that the marijuana test results would be negative.

levels can stay low enough for a negative for a couple hours after the water was drunk but they subsequently returned to positive. The results were the same wither with "cleansing products"  and regular drinking water. With any flushing rather if it's with certo or herbs or some 40 dollar drink you got at GNC or a head shop they all tell you to drink a gallon water afterwards. This is what causes it to dilute levels to pass.

If you are planning on using the flushing method, you will need to drink large volumes of liquids (water and anything else) before the test takes place.

Here's the issues and risk ....

For one flushing too far from a test can easily return to full levels so you have to load up on water pass a first piss containing pre water loading that still contains denser metabolite levels. Then you have to get the next piss submitted before it gets contaminated as levels return because your not  DETOXED but DILUTED. 

Failing from Dilution is a common result of imperfect flushing. Before a sample is drug screened it is VALIDATED . 

Urine Validation screens check  a sample to normal human levels for Creatinine , pH, Specific Gravity and looks for additives Nitrites, Glutaraldehyde , and Oxidants. So although the density of the drug metabolites are crashed so is the Specific Gravity or density (regardless of B vitamins to turn it yellow)  of sample and Creatinine  which has to show to prove its human. Allot of the information on flushing  on the web is pretty dated and was from before validation testing became a regular part of a drug test.   

This is why Passitkit.com doesn't sell the drinks and pills for this reason but produces  custom powdered Synthetic urine kits. The First and probably the only real uric acid synthetic urine . It has never failed a test in 18 years which also shows how reliable their delivery kits for substitution like Urine Trouble synthetic urine kit  and One Shot a temperature metered bottle perfect to pass a random urine test  at any time.   

SAMPLES OF PEOPLE WHO DRANK TOOOO MUCH WATER

Results came back negative diluted, have to do another test

Question/Help

Hey, I will link this on my other post, but basically I had a drug test for a job Monday. Saturday night I did the pectin method. So I got a 32 oz of red gatorade and pour certo in it and shook it up than drank it in 10 minutes than drank half a gallon of water in the next 30 minutes than took half of a b-complex pill right after than drank another half gallon after those first 40 minutes over the next 1:30 hours. Than I pissed a shit ton and tested negative at my at home test saturday night after 4 hours from starting the method. did the same thing sunday and passed again. Did the same thing Monday morning before my test but took the b-complex an hour after usual and my results came back negative but diluted. I’m think I should drink less water hit faster, maybe 32 oz in like 15 minutes and that’s it and than pop a whole b complex and piss a shit ton and still do it 4 hours before. My test is tomorrow at 2 pm, gonna the pectin method tonight once and tomorrow morning right before my test. Lmk what exactly I should do?

Urine Validation. The Test before the Drug Screen

 

 Urine Specimen validity testing (SVT)  The Test Before the Test 

 

Specimen validity testing (SVT) is a critical component of urine drug screening programs. The process of collecting and testing urine samples for drugs of abuse can be susceptible to adulteration or substitution, making it challenging to ensure accurate test results. SVT is a mechanism used to assess the integrity of urine specimens and detect any attempts to tamper with or adulterate them.

SVT is a multifaceted process that includes various methods and techniques. Some of the primary methods used in SVT include testing for pH, creatinine, specific gravity, and temperature. These tests are used to assess the validity of the urine specimen by determining its composition and consistency. A urine sample that falls outside the expected ranges for any of these parameters may be indicative of tampering or adulteration.

Another common SVT method is the use of oxidizing agents, such as bleach or nitrite, which can be added to urine to mask the presence of drugs. These agents can cause a false negative result, indicating that the urine sample is drug-free, even if drugs are present. However, SVT can detect the presence of these oxidizing agents and other adulterants, allowing for accurate test results.

In addition to these methods, SVT also involves chain of custody procedures, including documentation and tracking of the sample from collection to testing. This ensures that the sample has not been tampered with or substituted during the collection process.

The use of SVT is essential for maintaining the integrity of urine drug screening programs. It provides a reliable mechanism for detecting attempts to alter or adulterate urine specimens and ensures accurate test results. SVT can help prevent false negatives or false positives, which can have significant consequences for individuals undergoing drug testing.

It is important to note that SVT is not foolproof and can be susceptible to manipulation by individuals attempting to cheat the system. However, the use of multiple SVT methods and stringent chain of custody procedures can help minimize the risk of tampering or substitution.

In conclusion, SVT is a critical component of urine drug screening programs. It involves various methods and techniques to assess the validity of urine specimens and detect attempts to tamper with or adulterate them. The use of SVT helps maintain the integrity of drug testing programs and ensures accurate test results.

 

Most times a collection center / lab will use a reagent stick validation before "accepting" the sample to be sent to the lab for drug screening.  A quantitative validation test verifies its ph, color, specific gravity ( verifies dilution ) creatinine level and looks for nitrates or non urine AGENTS.  This dentures wasting time testing bad synthetic or adulterated urine.

This video will show the validation screen perimeters while showing the levels of out FAKE IT Synthetic Urine by PASSITKIT.COM 

 

Fake It  Synthetic urine Validation Screening

Fake It synthetic urine test normal in all categories

FAKE IT  Is sold at Hair Razor Detox